Effect of baking in different ovens on the quality and structural characteristics of saltine crackers

The aim of the study was to evaluate the physical and microstructural characteristics of crackers baked in four different industrial baking ovens (indirect radiation-cyclotherm, indirect convection, hybrid and industrial tunnel-ITO). Indirect convection and cyclotherm ovens provide the highest (5685.43 ± 51 W m⁻²) and the lowest (4860 ± 38.87 W m⁻²) amount of heat flux, respectively. Despite the amount of heat flux, indirect convection led to crackers with the highest moisture (7.86% vs. 4.82% in clyclotherm) and specific volume, but the lowest hardness. Cyclotherm resulted in crackers with lower specific volume, surface area, porosity, smooth and regular surface. Conversely, the hybrid and ITO ovens showed closer heat flux, leading to crackers with similar moisture content, texture parameters, specific volume, browning and inner porosity. Overall results show the potential of baking using different ovens for modifying the quality parameters of the crackers.     

城市隧道照明设计探讨

根据近些年的城市隧道工程设计经验,介绍了隧道照明的设计依据、标准及基本要求,分析了城市隧道照明设计的照明标准值、灯具布置、应急照明、照明控制、配线、节能措施等方面内容,并对隧道照明工程设计实例进行了探讨。     

引水隧洞瓦斯封堵施工技术探讨

山西中部引黄工程24标西干29+089.4~29+278隧洞段地处煤层带,富含瓦斯、一氧化碳等有害气体,且围岩节理发育、变形严重。针对初期支护完成地段、掌子面及裸露洞段和IV类围岩地段提出瓦斯封堵专项施工方案。通过密切监测做好通风,并采用高分子材料马丽散对其注浆,可有效解决隧洞瓦斯封堵难题,为类似项目提供参考。     

公路隧道喷射混凝土套拱加固结构力学特性

为研究喷射混凝土套拱加固前后二次衬砌与混凝土套拱的受力状况,依托陕西汉中至留坝段八里关隧道,运用有限元软件建立隧道混凝土结构套拱加固分析模型,并通过现场监测获取二次衬砌与套拱间的接触压力、套拱格栅拱架钢筋应力、套拱混凝土应力,将数值模拟结果与现场测试结果相结合,得出套拱结构的一般受力变化规律。结果表明:套拱加固前衬砌结构的最不利荷载位置位于施工缝附近的拱顶、拱肩与拱脚处; 由于衬砌局部变形与温度应力的影响,套拱混凝土应力变化呈现反复“上升-下降-上升”最后趋于稳定的特点; 套拱的作用是控制二次衬砌的进一步变形,套拱施作后所承受荷载较小,套拱反作用力远小于围岩作用于衬砌的应力,在应力计算中不应将衬砌与套拱作为整体计算; 套拱结构数值模拟所得的结果与现场测试套拱结构内力(轴力、弯矩)的大小及分布相似度高,但在衬砌裂损严重部位,数值模拟所得结果误差较大,应以现场测试结果为准。     

矿井地面风硐的改造方案比选与施工

为解决通风系统改造后原地面风硐断面偏小、风速超限的问题,通过在原有地面风硐东侧并联一道钢制矩形通风管道的方法,从而增加风硐断面积,降低风硐内的风速和通风阻力,效果明显。     

Experimental study on the effect of lateral concentrated smoke extraction on smoke stratification in the longitudinal ventilated tunnel

Smoke is the main cause of death in tunnel fires. It is one of the important measures to maintain smoke stratification in the early stage of tunnel fire. This article focused on experimentally studying the combined effect of lateral concentrated smoke extraction and longitudinal ventilation on the smoke stratification, which never be revealed before. The velocity of the smoke layer and air layer, vertical temperature distribution, and the flow patterns of the smoke were measured. It was found that the longitudinal ventilation and lateral concentrated smoke extraction would affect the flow of the smoke and change the shear velocity between the smoke layer and air layer, then, the patterns of the smoke layer will be affected. And the flow patterns with Froude (Fr) number can be classified into three categories: (a)Fr < 0.6 , with stable smoke stratification; (b) 0.6 < Fr < 0.85 , with a stable smoke stratification but the blurring interface; and (c) Fr > 0.85 , the smoke layer is completely unstable. The result can provide a reference for ventilation design of immersed tube tunnels.     

Temperature distribution within a ceiling jet propagating in an inclined flat-ceilinged tunnel with natural ventilation

In this study, we conducted detailed measurements of the temperature distribution within a steady fire-driven ceiling jet, formed in a tunnel with a rectangular cross-section. We then compared the measured temperature distributions with those for an unconfined smooth-ceiling jet flow, and estimated the relative errors between them. The results showed that the temperature distribution in a horizontal tunnel exhibits a greater bulge than that of a ceiling jet under an unconfined ceiling and varied from a bulging shape to an exponential shape as the tunnel inclination increased. We propose a new correlation for representing the temperature distribution, which takes the tunnel inclination into account, and which consists of an exponential function and a cubic function with a coordinated transformation.     

我国北方火炕烟囱中回风洞的数值模拟与分析

火炕采暖在我国北方农村地区非常普遍,为了取得更好的采暖效果,在原有火炕的基础上,以我国北方农村地区火炕中的回风洞(俗称“狗洞”)为研究对象,通过三组实验对烟囱进口处高温烟气的温度和速度进行了测定,依据流体运动中的三大守恒定律,分别建立了三组实验中烟囱内高温烟气流动的平面二维数学模型,利用FLUENT软件对烟囱内烟气的流动状态进行数值模拟,分析了烟囱进口烟气的运动趋势以及回风洞的有无对反风时火炕采暖系统的影响,最后得出结论是回风洞能有效地减弱外界风流的反向作用,阻止了突然自然反风而造成的烟气回流,甚至是火苗外窜的安全隐患。     

Design and construction of a two-dimensional hydrodynamic tunnel to study the free motions of solids in a uniform flow

Autonomous Underwater Vehicles (AUVs) are increasingly important tools for marine applications. A reasonably reliable prediction of their six degrees of freedom (6DOF) motions is essential. The manoeuvrability of these unmanned submarines relies on the capability to predict the hydrodynamic forces on a freely moving submerged body. Numerical simulators integrating the full physics of the problem have been developed but their validation remains the key issue. Three-dimensional calculations still take too much computing power to complete the very large number of simulations which is required for a full validation procedure. Furthermore, a very large pool with expensive measuring devices is also necessary to obtain experimental results. It was therefore decided to construct a 2D hydrodynamic tunnel in which an object can move with three degrees of freedom solely subjected to gravity and hydrodynamic forces. In the present paper, we describe the experimental device ensuring a simple and rapid implementation of trials: a 2D channel with a constant uniform flow. A general validation is considered with an ellipse. The experimental trajectories are compared with the corresponding analytical results and discussed at the end of the paper.     

苏通GIL运输专用机具动力电池类型探讨

GIL运输专用机具是为安全、可靠、高效地完成苏通GIL综合管廊工程GIL单元的运输任务而研制的专用机具,其中动力电池系统设计是整机设计的重点之一。通过对各种常见动力电池优缺点的分析,并结合苏通GIL运输专用机具对动力电池的需求分析,确定了动力电池系统的技术路线,为苏通GIL运输专用机具的研制提供了坚实的基础。